SCCBC Forum - Print Page

SCCBC Forum
https://www.sccbc.net/forum/YaBB.pl General >> Tech Corner >> Roll Cage $$ https://www.sccbc.net/forum/YaBB.pl?num=1367118807 Message started by Pass Tense on Apr 27^th, 2013 at 7:13pm

Title: Roll Cage $$
Post by Pass Tense on Apr 27^th, 2013 at 7:13pm

just wondering what one would expect to pay to have a cage installed in a civic? (welded, not bolt in) for IP3.

Thanks for any insight!

Scott

Title: Re: Roll Cage $$
Post by ip2gsr on Apr 30^th, 2013 at 8:05am

It varies a lot based on what you want you for additional tubes beyond what the rule book requires as a minimum. I also varies a lot based on what you expect the cage builder to do in preparation of installing the cage. Is he going to strip the interior? Is the dash and wiring still in place?

You can figure on about $1800 on the very low end assuming you find the right (cheap) builder. I would say a more expected norm would be $2200 - $3500.

Dave

Title: Re: Roll Cage $$
Post by Mike_the_Oldest on Apr 30^th, 2013 at 9:44am

Call Fred Semple at Kingpin Engineering and see what he charges. Fred is very good with this stuff.

Title: Re: Roll Cage $$
Post by Pass Tense on Apr 30^th, 2013 at 5:49pm

Great! Thanks for the info.