SCCBC Forum | |
https://www.sccbc.net/forum/YaBB.pl
Buy, Sell & Rent >> Wanted >> Fabricator & Welder https://www.sccbc.net/forum/YaBB.pl?num=1389389250 Message started by SBR1055 on Jan 10th, 2014 at 1:27pm |
Title: Fabricator & Welder Post by SBR1055 on Jan 10th, 2014 at 1:27pm
I am Looking for a good fabricator and welder who can help me fit a new motor into my Diasio D962 #58. Motor should be arriving from George Dean Race Engines within the month.
Thanks, Shane. 604 202 1737 shanebourelracing@shaw.ca |
Title: Re: Fabricator & Welder Post by oldtransamdriver on Jan 10th, 2014 at 6:14pm
Fred Semple - Kingpin Engineering 604-534-4868
Robert |
Title: Re: Fabricator & Welder Post by Bob_Williams on Jan 10th, 2014 at 6:18pm
Andy Pearson.....specialty engineering Delta. 604.598.9232
|
Title: Re: Fabricator & Welder Post by SBR1055 on Jan 10th, 2014 at 6:51pm
Great! Thanks guys, I will start there. Shane.
|
Title: Re: Fabricator & Welder Post by Mike_the_Oldest on Jan 11th, 2014 at 4:26am
Steve Hudson @ HUDTECH@shaw.ca or (604) 241-4242 might also be able to help.[size=12][/size]
|
Title: Re: Fabricator & Welder Post by Hudtechfab on Jan 11th, 2014 at 6:45pm
I'd be interested in helping you out with that. Please give me a call at 604 724-5722
Steve Hudson www.hudtechfab.com |
Title: Re: Fabricator & Welder Post by SBR1055 on Jan 13th, 2014 at 11:35am
Thank you for the help, I believe I have found my fabricator. Cheers, Shane.
|
SCCBC Forum » Powered by YaBB 2.5.2! YaBB Forum Software © 2000-2024. All Rights Reserved. |