SCCBC Forum
https://www.sccbc.net/forum/YaBB.pl
Buy, Sell & Rent >> For Sale >> Formula Ford Project
https://www.sccbc.net/forum/YaBB.pl?num=1561567446

Message started by JGB on Jun 26th, 2019 at 8:44am

Title: Formula Ford Project
Post by JGB on Jun 26th, 2019 at 8:44am
I purchased the car in 2015 as a 1972 Elden. All documentation at the time indicated it was a 1972 but
later research indicates it is a 1973. Has SCCA log books back to 1979.

After numerous delays due to various reasons I had the car at the point I wanted then… due to either
driver error or mechanical failure hit a curb during an autocross and bent the front left frame fairly
badly.
I believe the frame is repairable, but I’m done with this car.

In addition to the frame repairs the floor will have to be replaced, the radiator will need work or be
replaced and the left front lower arm is bent (new ones available from the UK). It is possible other work may be required.

Highlights
New Kent engine 2018 built by Alan McColl MCE motors
2 sets of wheels, 3 sets of tires. 
Mk8 Hewland with 16 sets of gears.
Lots of other new parts since 2015.  See attached pdf for details.

$10,000 Cdn firm.  At this price no shipping is included.  This is $3000-$5000 less than I might get parting the car out.  I would estimate the value of a race ready car at $20,000 Cdn. 

If there is no interest in the next couple of weeks I’ll start parting the car out.
Jim Bradley





https://www.sccbc.net/forum/YaBB.pl?action=downloadfile;file=Elden_For_Sale_details.pdf (202 KB | 189 )

Title: Re: Formula Ford Project
Post by JGB on Jun 26th, 2019 at 10:22am
More photos at:
https://jimbradley.smugmug.com/Cars/My-Cars/Elden-2017-Re-and-Re

https://jimbradley.smugmug.com/Cars/My-Cars/Elden-PH10B-Formula-ford

https://jimbradley.smugmug.com/Cars/My-Cars/Project/n-2WtnkW

Jim

Title: Re: Formula Ford Project
Post by JGB on Jun 26th, 2019 at 10:30am
In addition if someone buys the entire package I'll give them first refusal on:

All aluminum semi-custom open trailer from Express Trailers http://www.expresstrailer.ca/.  Dual axle 1500lbs 300lbs total rated, weighs ~600 lbs, ramps, winch, $3500

MK Tech rolling stand $500 http://www.mktechnologies.com/

Title: Re: Formula Ford Project
Post by alangbaker on Jun 28th, 2019 at 1:20pm
Sorry things went sideways (no pun intended) on you, Jim.

Does the statement, "I'm done with THIS car" imply that there might be another for you at some point? I certainly hope so.

Title: Re: Formula Ford Project
Post by Keith Robinson on Jun 30th, 2019 at 8:31am
Sorry to hear you have given up on this car.
Repairing it and selling a complete Vintage Formula Ford would probably be your best chance of recouping the money invested.

If you start 'parting it out' I'm interested in the exhaust header.

SCCBC Forum » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2024. All Rights Reserved.