Welcome, Guest. Please Login or Register
 The Sports Car Club of BC
   
 
  HomeHelpSearchLoginRegister  
 
  SCCBC Forum › General › Tech Corner › roll cage for road racing
(Moderator: Forum Admin)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
roll cage for road racing (Read 73 times)
ExKarter
Spectator
*
Offline


SCCBC Forum Member

Posts: 21
Vancouver, B.C.
roll cage for road racing
Jul 8th, 2026 at 11:39am  
HI all.  Just wondering if the car I was looking at, has a full roll cage, is that all is needed for racing?  It has door bars and full bars in the front and top of the driver and on both sides of the car.   

I have pictures if you need to see it.

Thanks.
Back to top
 
739174828_1689488802147706_6329501837931001305_n.jpg (125 KB | 9 )
739174828_1689488802147706_6329501837931001305_n.jpg
 
IP Logged
 
Forum Admin
SCCBC Administrator
*****
Offline



Posts: 1,204
BC,  Canada
Re: roll cage for road racing
Reply #1 - Jul 16th, 2026 at 7:48am  
There are several factors related to the roll cage that is acceptable for use within CACC such a pipe material, thickness, location of specific components, etc. All of the requirements for a roll cage are laid out in the CACC race regulations available on caccautosport.org.
Back to top
 
Take it to the track.
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
 
  « Home ‹ Board Top of this page

SCCBC Forum » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge