SCCBC Forum - Race car weight mins vs published weights

	Welcome, Guest. Please Login or Register

Home

Help

SCCBC Forum › General › Tech Corner › Race car weight mins vs published weights

(Moderator: Forum Admin)

‹ Previous Topic | Next Topic ›

Pages: 1

Race car weight mins vs published weights (Read 2,305 times)

Pass Tense Novice Offline Senior Racer Posts: 69 Vancouver	Race car weight mins vs published weights May 15^th, 2014 at 11:11am Would the min. race car weight required, be the same as the published weight of the production based car for that year and model? (ip3) Having trouble finding this info. Thanks for any insight! Scott
Back to top	1991 IP3 Civic #32 IP Logged

Mike_the_Oldest

International License

Offline

Posts: 854
B.C.

Re: Race car weight mins vs published weights
Reply #1 - May 15^th, 2014 at 12:33pm

NO!!!!

Weights vary from model to model and from year to year. We've had RX-7, for example, show up with a couple of different applicable weights.

If you're looking for the weight to use, I suggest you look at the ICBC registration for your car. Also, the weights and measures section of the shop manual (which is required). Some, but not all, shop manuals do not have the weights in them. If you can get the ICBC registration weight then apply the IP rule you'll be fine.

If you're in doubt, e-mail me.

IP Logged

Pass Tense Novice Offline Senior Racer Posts: 69 Vancouver	Re: Race car weight mins vs published weights Reply #2 - May 15^th, 2014 at 2:13pm Thanks Mike, I'll start with that. I'll send you an email if I need further clarification. I appreciate your input!
Back to top	1991 IP3 Civic #32 IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page